Ruijie Reyee RG-EST350 V2

CPE Ruijie

Setup instructions, default access credentials, and network configuration guide.

Device Overview

The Ruijie Reyee RG-EST350 V2 is an outdoor wireless bridge kit tailored for video surveillance backhaul, elevator shafts, and building-to-building links.

Shipped factory pre-paired in matched pairs, technicians can deploy links out-of-the-box without manual software configuration.

Dual Gigabit Ethernet ports provide pass-through connectivity for IP cameras and local switch drops with IP54 weatherproofing.

📡

Looking for MikroTik CPEs like SXT or LHG?

MikroTik radios use Terminal and WinBox scripts rather than simple Web GUIs. See MikroTik scripts for ready-to-paste configurations.

Default IP Address 192.168.120.1

Default Credentials

User: admin | Pass: admin

How to Connect (Physical & Network Setup)

The units ship pre-paired in a kit (Recorder-end AP and Camera-end CPE). Connect 12V/24V PoE to the devices. Default IP is 192.168.120.1.

Step-by-Step Configuration Steps

1 Power both devices using the included PoE injectors or 12V DC terminals.
2 Wait 2 minutes for the automatic pairing process to complete (the 3 signal LEDs will light up).
3 Connect PC to the LAN port and access http://192.168.120.1 in your browser.
4 Sign in using 'admin' / 'admin'.
5 In the dashboard, view wireless bridge status, channel frequency, and link RSSI.
6 Configure static management IP in your surveillance or network subnet.
7 Save settings and mount devices using the swivel wall/pole brackets.

Verification Step

Check the 3 signal LEDs on the front panel: 3 solid LEDs indicate signal > -65 dBm.

Firmware Note: EST350 V2 operates on 5 GHz 802.11ac with 15 dBi directional antennas for links up to 5 km.

Menu names may vary by model and firmware version.

Report wrong info

⚠️

Notice: This is sample configuration data for field technicians and small ISPs. Verify details against official manufacturer documentation and your device casing label before applying in production.