MikroTik Generator CPE & Bridges Home Routers Network Tools About NetUtils

MikroTik NetMetal 5

CPE MikroTik

Setup instructions, default access credentials, and network configuration guide.

Advertisement Placeholder

Device Overview

The MikroTik NetMetal 5 is a rugged outdoor device housed in a sealed metal enclosure designed to withstand harsh weather conditions and reduce RF interference.

With two or three RP-SMA connectors, it is paired with external high-gain dish antennas for long-distance point-to-point links or sector antennas for point-to-multipoint base stations.

It includes an SFP cage for direct optical fiber runs up towers, isolating the radio from ground loops and lightning transients on long copper runs.

🛠️
Need a ready-to-paste MikroTik script for MikroTik NetMetal 5?

Use our free MikroTik script generator to build Station-Bridge, PPPoE, AP, or full WISP router scripts with one click.

Open MikroTik Generator →
Default IP Address 192.168.88.1
Default Credentials
User: admin  |  Pass: (empty / no password)

How to Connect (Physical & Network Setup)

Connect external RP-SMA antennas before powering on to prevent amplifier damage. Connect Gigabit PoE to the NetMetal port.

Step-by-Step Configuration Steps

  1. 1 Connect via WinBox MAC address discovery.
  2. 2 Enter username 'admin' with blank password.
  3. 3 Verify in Interfaces that wlan1 (or wifi1 on v7) detects the high-power radio chain.
  4. 4 Set antenna gain settings matching your connected dish or sector antenna.
  5. 5 Apply the Station-Bridge or AP script from NetUtils generator via New Terminal.
  6. 6 Check System > Health for board temperature and voltage reading.
  7. 7 Configure custom admin credentials and disable unused services under IP > Services.

Verification Step

Verify antenna chain status in Wireless > Registration and test interface traffic with Tools > Torch.
Firmware Note: High-power output up to 2000 mW. Always configure proper antenna gain to adhere to local frequency regulations.

Menu names may vary by model and firmware version.

Report wrong info
⚠️
Notice: This is sample configuration data for field technicians and small ISPs. Verify details against official manufacturer documentation and your device casing label before applying in production.