Ruijie Reyee RG-EW1200G Pro

Router Ruijie

Setup instructions, default access credentials, and network configuration guide.

Device Overview

The Ruijie Reyee RG-EW1200G Pro is a Gigabit dual-band AC1300 router with six omnidirectional 6 dBi antennas and independent power amplifiers.

It features seamless Reyee Mesh roaming, allowing technicians to pair additional access points with a single button press without running new cables.

For small WISPs, it provides remote cloud provisioning and management through the free Ruijie Cloud platform.

Default IP Address 192.168.110.1

Default Credentials

User: admin | Pass: (set on first setup)

How to Connect (Physical & Network Setup)

Connect the yellow WAN port to your incoming fiber ONT or CPE. Connect PC to any LAN port (1-3) or connect to the default Reyee Wi-Fi.

Step-by-Step Configuration Steps

1 Open browser to http://192.168.110.1 (or use the Reyee Router app).
2 Follow the setup wizard to detect Internet connection type (DHCP, PPPoE, or Static).
3 Set the administrator password.
4 Configure Wi-Fi SSID and password for both 2.4 GHz and 5 GHz bands.
5 Enable Reyee Mesh if adding secondary nodes for whole-home coverage.
6 Optionally link to Ruijie Cloud for remote ISP monitoring.
7 Confirm Internet access and run a speed test in the management console.

Verification Step

The front indicator LED turns solid green when connected to the Internet.

Firmware Note: Supports Reyee Mesh protocol with one-click pairing button on the top cover.

Menu names may vary by model and firmware version.

Report wrong info

⚠️

Notice: This is sample configuration data for field technicians and small ISPs. Verify details against official manufacturer documentation and your device casing label before applying in production.