MikroTik Generator CPE & Bridges Home Routers Network Tools About NetUtils

TP-Link Archer C6

Router TP-Link

Setup instructions, default access credentials, and network configuration guide.

Advertisement Placeholder

Device Overview

The TP-Link Archer C6 (AC1200) is a dual-band gigabit Wi-Fi router commonly deployed as the customer premises gateway in residential fiber and WISP installations.

It provides four Gigabit LAN ports and one Gigabit WAN port, supporting up to 867 Mbps on 5 GHz and 300 Mbps on 2.4 GHz.

Its software includes a dedicated Access Point mode that disables NAT, DHCP, and firewall rules in one click, turning it into a pure wireless AP for bridged topologies.

Default IP Address 192.168.0.1
Default Credentials
User: admin  |  Pass: (configured on initial wizard)

How to Connect (Physical & Network Setup)

Connect the blue Internet (WAN) port to your fiber ONT or rooftop CPE. Connect your PC via Ethernet to any yellow LAN port (1-4) or connect via the Wi-Fi credentials on the bottom label.

Step-by-Step Configuration Steps

  1. 1 Open browser and navigate to http://192.168.0.1 (or http://tplinkwifi.net).
  2. 2 Create a new administrator password when prompted.
  3. 3 Run the Quick Setup wizard: Select your Time Zone.
  4. 4 Select your Internet Connection Type: choose 'PPPoE' (enter ISP username and password) or 'Dynamic IP' (DHCP).
  5. 5 Set your 2.4 GHz and 5 GHz Wi-Fi network names (SSID) and wireless passwords.
  6. 6 Save and apply settings. If used as an Access Point behind another router, switch Operation Mode from 'Wireless Router' to 'Access Point'.
  7. 7 Reboot and confirm Internet status shows connected with a valid IP.

Verification Step

The Internet LED on the front panel will turn solid green/amber. In the web GUI, the Network Map will show Internet status: Connected.
Firmware Note: Archer C6 v3 / v4 supports MU-MIMO and WPA3 personal security. Check firmware updates via TP-Link Cloud.

Menu names may vary by model and firmware version.

Report wrong info
⚠️
Notice: This is sample configuration data for field technicians and small ISPs. Verify details against official manufacturer documentation and your device casing label before applying in production.